CA series / Ultra-Compact Amplifiers

CA120HZ

Name: Ecler CA120HZ
Brand: Ecler
SKU: CA120HZ

120W@70/100V | mono | micro-amplifier | EQ

CA120HZ is the high impedance version of the CA120, delivering 96W @ 70/100V line level, a technology which is especially suitable for long loudspeaker wire runs and/or an amount of loudspeaker units far beyond the 2 or 4 units typically connected to a low impedance amplifier. Under its tiny size, it features an amazing set of remote control features: serial RS-232 port, IR receiver and 0-10 VDC remote port. CA120HZ is an ideal solution in those audiovisual applications which require integration with external control devices: education classrooms, meeting rooms, multimedia presentations, retail shops, etc.

Request a quote →Chat on Zalo

Key features

011 x 96W RMS @ 70 / 100V amplifier

02Universal external power supply

03AUTO STANDBY function: in the absence of an audio signal the unit automatically goes into STANDBY mode, minimising power consumption

04Lightweight, silent, high-performance amplifier (fan-free convection cooling)

051 switchable balanced mic / unbalanced line input, with high quality microphone preamplifier, phantom power supply, noise gate and “talkover” function or priority over the rest of input

062 stereo lines (unbalanced)

072-band independent tone control (Bass, Treble) for the microphone / line 3 and line 1&2 input connection.

08Auxiliary output for liaison with other amplifiers or external audio devices

09Local control by digital rotary knob (“encoder”)

10Remote control by infrared remote control

11Remote control by WPaVOL or WPaVOL-SR (0-10 VDC) wall panel

12RS-232 control port, compatible with EclerCOMM software (free) and control protocol CA-NET

13MUTE port to silence the entire unit by closing external contact

CHANNELS

Number of output channels: 1 + 1 AUX
Output connection type: Euroblock
Output configuration: 1 x 96W RMS @ 70/100V
Number of input channels: 3
Input connection type: MIC: balanced Euroblock or jack LINE: unbalanced minijack or double RCA
Input configuration: 1 MIC/LINE input 2 LINE inputs

OUTPUT POWER - All channels driven @ 1%THD

Max output power @ 100V: 96W @ 100Ω

SIGNAL

Input sensitivity: LINE: 0dBV (-6dBV internally selectable) MIC: -20 to -50dBV
Input impedance: LINE: >8kΩ MIC: >1kΩ
Frequency response: 50Hz - 30kHz (-3dB)
THD + Noise: SPKR OUT: <0.09% AUX OUT: < 0.02%
SNR: LINE: >70dB MIC (BAL): >50dB
Crosstalk: >65dB @ 1kHz
CMRR: MIC (BAL): >65dB @ 1kHz

ELECTRICAL

Power supply: Universal
AC mains requirement: 100-240 V @ 50-60Hz + External PSU 24VDC (using Meanwell GS60A24-P1J)
AC mains connector: DC24V power connector

POWER CONSUMPTION

Power Consumption (1/3 POWER, @ 4Ω all channels driven): pink noise, 58VA / 52W
Power Consumption (1/8 POWER, @ 4Ω all channels driven): pink noise, 33VA / 24W
Power Consumption (STBY/SLEEP): <2.5W

TECHNOLOGIES

Energy saving: Auto standby function
Efficiency: TBC
Cooling: Convection (fanless)

PROTECTIONS

AC protection: No
DC protection: No
VHF protection: No
Short-circuit protection: No
Clip limiter: No
Long term limiter: No
Thermal protection: No

REMOTE CONTROL CONNECTIONS

GPIs: Volume & Input/preset selection (0-10V. based)
External MUTE: Power free contact (infrared remote)

SETTINGS

Attenuators: Front panel knob
Tone control: 2-band independent tone control (Bass, Treble) for the microphone / line 3 and line 1&2 input connection.
Filters: 50Hz - 70Hz High Pass Filter
Output settings: Mono only outputs (L+R summed in case of active stereo input)
Auto standby function: Rear panel micro switch
Auto standby time: 120 seconds

CONNECTIVITY

Serial port: RS-232
Programing and control: EclerCOMM software or CA-NET protocol

MONITORING

Signal Present: SP LED (Green)
Cliping: CLIP LED (Red)
Standby: STBY LED (Orange)

PHYSICAL

Operating temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
Operating humidity: <85% HR
Storage temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
Storage humidity: <90% HR
Installation options: Wall or under a surface (table, shelf, cupboard, etc.)
Included accessories: REVO-IR remote control
Optional accessories: WPaVOL or WPaVOL-SR for remote control
Dimensions: 160 x 48 x 325 mm / 6.3 x 1.89 x 12.8 in. (WxHxD)
Weight: 2.92 kg / 6.44 lb
Shipping dimensions: 450 x 60 x 220 mm / 17.72 x 2.36 x 8.66 in. (WxHxD)
Shipping weight: 3.8 kg / 8.38 lb