NXA series / Networkable Amplifiers

NXA6-80

Name: Ecler NXA6-80
Brand: Ecler
SKU: NXA6-80

NXA6-80 is a 6 channel x 80W self-powered digital manager that stays halfway between a digital matrix and a multichannel amplifier. An "all-in-one" digital audio device that becomes a complete audio solution, including several remote control options and a long list of smart features.

Request a quote →Chat on Zalo

Key features

016 analogue audio inputs x 6 powered audio outputs

02Class D amplifiers (eco friendly)

03Auto stand-by function (eco friendly)

04100% silent (fanless convection cooling system)

05Health self-test mode function, with FAULT RELAY (for an external redundancy system)

06Integrated anti-clip system

07Integrated DSP processor.

08Inputs mixer independent per channel (all inputs available)

09VOLUME, MUTE, SOLO, PHASE INVERSION, MAX. VOL limit and MIN.VOL limit, LP and HP Crossover filters, parametric EQ filters bank, Ducker, Delay, Compressor and more settings configurable per channel.

10Ethernet interface, compatible with EclerNet Manager platform and UCP remote control system

11RS-232 Interface

12TP-NET third-party remote control (compatible with CRESTRON®, AMX®, RTI®, VITY®, etc.)

CHANNELS

Number of output channels: 6
Output connection type: 2-pin Euroblock
Output configuration: SINGLE (independent), PARALLEL or BRIDGED
Number of input channels: 6 analogue input channels
Input connection type: Analogue: IN1-6: 3-pin Euroblock
Input configuration: Digital matrix 6 in x 6 powered audio out

OUTPUT POWER - All channels driven @ 1%THD

Max output power @ 8Ω: 42 WRMS
Max output power @ 4Ω: 65 WRMS
Max output power @ 8Ω bridge mode: 158 WRMS

SIGNAL

Voltage gain: +26 / +32 dB
Input impedance: Balanced, 22kΩ
Max input level: +18 dBV = +21dBu
Frequency response: 10Hz – 25kHz
THD + Noise: <0.05%
SNR: >100dB (110dB typ.) - TBC
Crosstalk: >75 dB
CMRR: >50 dB
Damping factor: >150

ELECTRICAL

AC mains requirement: 115V/230V @ 47-63Hz
AC mains connector: IEC mains inlet

POWER & HEAT @230VAC - 1/4 POWER, @ 4Ω (all channels driven)

Power: 290VA

POWER & HEAT @230VAC - 1/8 POWER, @ 4Ω (all channels driven)

Power: 144VA

POWER & HEAT @230VAC - IDLE

Power: <3W

POWER & HEAT @120VAC - 1/4 POWER, @ 4Ω (all channels driven)

Power: 290VA

POWER & HEAT @120VAC - 1/8 POWER, @ 4Ω (all channels driven)

Power: 144VA

POWER & HEAT @120VAC - IDLE

Power: <3W

TECHNOLOGIES

Amplification technology: Class D
Energy saving: Auto stand-by function
Cooling: Convection cooling system
Maximum fan noise: Fanless

DSP

Latency: 2ms
Digital processing: 32/64 bits
Inputs processing: LP and HP Crossover filters, Compressor / Limiter
Outputs processing: Parametric EQ filters bank, Ducker, Delay, Compressor

PROTECTIONS

AC protection: No
DC protection: No
HF protection: No
Short-circuit protection: Yes
Clip limiter: Yes
Long term limiter: No
Thermal protection: Yes

REMOTE CONTROL CONNECTIONS

GPIs: x6 GPIs (0-10V)

LOCAL CONTROL

Attenuators: Front panel amplified OUTs attenuators
Output mode settings: SINGLE (independent), PARALLEL or BRIDGED
Power ON/OFF: Yes, back panel switch

CONNECTIVITY

Ethernet: Ethernet Base-Tx 10/100Mb, Auto X-Over, Cat5
Programing and control: EclerNet Manager control application

MONITORING

Signal Present: SP LED
Cliping: CLIP LED
Protect: PROT LED
Data: DATA LED
On: GREEN when RUN ORANGE when AUTOSTBY RED when in PROT mode

AUDIO CONVERTERS

Sampling rate: 48 kHz
Resolution: 24 bit
Dynamic range: 115 dB

PHYSICAL

Operating temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
Operating humidity: <85% HR
Storage temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
Storage humidity: <90% HR
Installation options: 19" rack format (2RU)
Optional accessories: WPaSCREEN
Dimensions: 482.6 x 88 x 373 mm / 19 x 3.46 x 14.69 in. (WxHxD) (Handles and knobs excluded)
Weight: 10.2 kg / 22.49 lb

Compatible accessories

WPNETTOUCH

Digital Controls & Panels

EclerNet Touchscreen Control Panel