BIO series / Digital Matrixes

BIO-X8

Name: Ecler BIO-X8
Brand: Ecler
SKU: BIO-X8

EclerPLEX Expansion Interface 8x8 Analogue Audio

BIO-X8 is a cost-effective expansion interface designed to seamlessly increase the capacity of an EclerPLEX digital host matrix. This unit contributes 8 additional analogue audio input ports and 8 analogue audio output ports to the system’s default configuration. A maximum of two BIO-X8 units can be connected to a single EclerPLEX host matrix, allowing for a maximum configuration of 24 analogue audio input ports, 24 analogue audio output ports, and up to 24x24 GPIO control ports.

Request a quote →Chat on Zalo

Key features

01EclerPLEX audio I/O & control expansion unit, compatible with VIVO host units.

02Connection via X-link to the VIVO host unit (1m Ecler certified X-link cable included).

03Expansion features (added to the host VIVO unit ones):

04• 8 MIC / LINE analogue audio inputs ports (+48V Phantom selectable per port).

05• 8 LINE analogue audio output ports.

06A maximum of 2x BIO-X8 or BIO X8G units can be connected to a single VIVO host unit, using its 2x X-link expansion ports.

AUDIO CONVERTERS

Sampling rate: 48 kHz
Resolution: 32 bit
Latency: 3.87ms
Frequency response: 10Hz to 20kHz (-0,5 dB)
Dynamic range: ADC:115dB, DAC: 115dB

ANALOGUE AUDIO INPUT PORTS

Number of input ports: 8, MIC/LINE level
Connection type: Euroblock, 3-pin, balanced
Input sensitivity: -32,5 dBV to +18,5 dBV -30,3 dBu to +20,7 dBu
Input impedance: 8kΩ (balanced), 4kΩ (unbalanced)
Max input level: 18,5 dBV / 20,7dBu
Mic preamp EIN: <-129,5 dBV <-127,3 dBu
Dynamic range: Gain 0 dB: >110,2 dB Gain 21 dB: >109,5 dB Gain 42 dB: >105,5 dB Gain 51 dB: >99,5 dB
THD + Noise: Gain 0 dB & Vin 0 dBV: 0,0025% Gain 21 dB & Vin -21 dBV: 0,0026% Gain 42 dB & Vin -42 dBV: 0,0044% Gain 51 dB & Vin -51 dBV: 0,0085% Gain 0 dB & Vin +17 dBV: 0,0010% Gain 21 dB & Vin -4 dBV: 0,0015% Gain 42 dB & Vin -25 dBV: 0,0010% Gain 51 dB & Vin -34 dBV: 0,0015%
CMRR: >70dB typ (1kHz) >60 dB typ (20 Hz - 20kHz)
Phantom power: +48VDC, 10mA per input max

ANALOGUE AUDIO OUTPUT PORTS

Number of output ports: 8, LINE level
Connection type: Euroblock, 3-pin, balanced
Max output level: 18,5dBV / 20,7dBu
Output impedance: 300Ω (balanced), 150Ω (unbalanced)
Dynamic range: > 112,5 dB
Crosstalk: > 95dB

CONNECTIVITY

X-LINK: 1, X-LINK port. USB-C connector

ELECTRICAL

Power supply: Internal. Universal, regulated switching mode supply
AC mains requirement: 100-240 VAC @ 47-63Hz
AC mains connector: IEC C14 inlet
Power consumption: <13W Standard, <15W Typ, <18,5W Max <26VA Standard, <30,5VA Typ, <36,5VA Max
Heat load: <54,6 BTU/h Typ, <68,2 BTU/h Max
Ventilation: FAN

PHYSICAL

Operating temperature: Min: 0°C / 32°F Max: 50°C / 122°F
Operating humidity: 5 - 85% RH, non-condensing
Storage temperature: Min: 0°C / 32°F Max: 50°C / 122°F
Storage humidity: 5 - 85% RH, non-condensing
Installation options: Desktop, 19" racks (1RU)
Included accessories: 1x EU Mains cord, 1x Multiplug Mains cord, 4x Washers, 4x Rubber feet, 1x USB-C Ecler X-Link certified cable, 8x Euroblock connectors (green colour), 8x Euroblock connectors (blue colour), 1x USB holder, 1x Screw.
Dimensions: 482.4 x 44 x 214 mm / 18.99 x 1.73 x 8.43 in.
Weight: 3 kg / 6.61 lb.
Shipping dimensions: 585 x 75 x 385 mm / 23.03 x 2.95 x 15.15 x in.
Shipping weight: 4.45 kg / 9.81 lb.

Compatible accessories

VIVO-X8

Digital Matrixes

EclerPLEX Matrix 8x8 Analogue 4x4 GPI

VIVO-X8D8

Digital Matrixes

EclerPLEX Matrix 8x8 Analogue 8x8 Dante/AES67