SAMI series / Installation Preamps. & Mixers

SAMI-702BT

Name: Ecler SAMI-702BT
Brand: Ecler
SKU: SAMI-702BT

ANALOGUE STEREO MIXER | 7x2 | 1U rack | Bluetooth®

SAMI-702BT is an installation audio mixer in standard rack format, featuring 6 MIC/LINE Stereo inputs + 1 Bluetooth® Stereo input, 1 main mix output and one AUX/REC additional output. It includes a 3 band tone control section, Talkover (priority) function assignable to each MIC/LINE input over the mix bus, ST/MONO mix switch and MUTE port for external dry contact triggering.

Request a quote →Chat on Zalo

Key features

017 input channels, 2 outputs 19” installation mixer

026 MIC/LINE Stereo inputs

031 Bluetooth® Stereo input

041 main mix output and one AUX/REC additional output

053 band tone control section

06Talkover (priority) function assignable from each MIC/LINE input over the mix

07Micro sensitivity level can be adjusted on the back panel

08+18V Phantom Power available for all MIC inputs

09MUTE remote control input enabled by external dry contact closure for connecting fire detection systems and other safety devices.

ANALOGUE AUDIO INPUT PORTS

Number of input ports: 6, MIC/LINE 1, BT in (Bluetooth® LINE STEREO)
Connection type: MIC: 3-pin Euroblock LINE/MIX: RCA Bluetooth® Receiver
Input sensitivity: LINE 1-6: 0dB Bluetooth® LINE 7: 0dB/-6dB (internally selectable) MIC BAL: -35dB
Input sensitivity adjust: MIC/LINE 1-6: ±15dB
Input impedance: LINE 1-6: 50kΩ MIC BAL: >1kΩ
CMRR: MIC: >60dB @ 1 kHz
Phantom voltage: +18VDC

ANALOGUE AUDIO OUTPUT PORTS

Number of output ports: 1 main mix output 1 AUX/REC output
Connection type: Main: 3-pin Euroblock AUX/REC: RCA
Output type: 1 STEREO/2 MONO main mix output 1 STEREO AUX/REC
Nominal output level: OUT: 0dB/+6dB (internally selectable) AUX/REC: 0dB/+6dB (follows MAIN OUT, when AUX OUT=POST)
Output impedance: OUT: 600Ω AUX/REC: 10kΩ

SIGNAL

Frequency response: LINE 1-6: 10Hz-50kHz -1dB Bluetooth® LINE 7: 20Hz-20kHz -1dB MIC BAL: 10Hz-30kHz -1dB
THD + Noise: LINE 1-6: <0.005% Bluetooth® LINE 7: <0.03% MIC BAL: <0.04%
Signal noise ratio: LINE 1-6: >100dB Bluetooth® LINE 7: >100dB MIC BAL: >85dB

DEVICE CONTROL

Tone Control: 3-way tone control
Tone Frequency Cut: BASS: 100Hz ±15dB MID: 2kHz ±15dB TREBLE: 10kHz ±15dB
Talkover: TIME: 2 seconds EFFECT: -30dB
Control Buttons: Power ON, Talkover, LINE/MIC, L+R (output), Gain knob, Volume knob, Bluetooth® Pair
Status Indicators: Power ON LED, MUTE LED, Vu-meter LEVEL LEDs, Pair LED
Programming and control: ECLER BLUETOOTH® MANAGER - EBTM
Interface: USB - C

REMOTE CONTROL CONNECTIONS

GPIs: MUTE control port NO/NC

BLUETOOTH®

Type: Class 1, 5.0
Range: 25m
Profiles: A2DP1.3/AVRCP1.6/HFP1.7.2/HSP1.2
Decoder support: AAC, SBC
Output configuration: STEREO / MONO (configurable via EBTM)

ELECTRICAL

Power supply: ±17.5VDC External PSU
AC mains requirement: 100-240 V @ 50-60Hz (External PSU: 17.5VDC)
AC mains connector: IEC inlet connector
Power consumption: 14.35VA / 6.6W
Cooling: Passive

PHYSICAL

Operating temperature: Min: 0°C ; 32°F Max: 35°C ; 95°F
Operating humidity: <85% HR
Storage temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
Storage humidity: <90% HR
Installation options: 19" rack format (1RU)
Included accessories: ±17.5VDC multi-plug PSU, EuroBlocks, Rubber Foot, Mini Jumpers
Dimensions: 482.5 x 44 x 153.7 mm / 19 x 1.73 x 6.05 in (WxHxD)
Weight: 1.9 kg / 4.19 lb
Shipping dimensions: 554 x 54 x 290 mm / 21.81 x 2.13 x 11.42 in (WxHxD)
Shipping weight: 2.75 kg / 6.06 lb