Distributed in Vietnam
Liza Trading
VIENGet a quote
Ecler eHMA60 — image 1
eHMA series / Mixing Amplifiers

eHMA60

60 WRMS | powered |audio mixer

eHMA60 is a self-powered audio mixer including one MIC input and two MIC/LINE ST inputs. It features a 60W powered mono output that supports both low (4 ohm) and high impedance (70V, 100V) loudspeaker lines. It also includes an audio priority system (paging, emergencies, etc.), 2 band tone control, auto stand-by mode, MUTE port, universal power supply unit and auto standby function.

Key features

011x60W @ 4ohm / 70V / 100V
021 MIC input
032 MIC / LINE inputs (INPUT 1 - Talkover function)
042-band EQ (BASS/TREBLE) for Mix Output
0524VDC power supply included
0624VDC Phantom Power (external switch)
07MUTE port to remotely mute the unit from an external device, via dry contact closure
08Auto Stand-by function
09Rack mount kit included

CHANNELS

Number of output channels
2
Output connection type
Euroblock
Output configuration
1 x 60 W @ 4Ω or 70V/100V
Number of input channels
3
Input connection type
MIC: balanced Euroblock LINE: unbalanced double RCA
Input configuration
1 MIC input 2 MIC/LINE inputs

OUTPUT POWER

Max output power @ 4Ω
66W
Max output power @ 100V
60W @ 166Ω

ANALOGUE AUDIO INPUT PORTS

Number of input ports
3
Connection type
Euroblock and double RCA
Input sensitivity
LINE1-2: -15dBV to + 15dBV MIC1-3: -20dBV to -50dBV
Input impedance
LINE1-2: >10 kΩ MIC1-3: >1 kΩ
CMRR
MIC (BAL): >65dB @ 1kHz
Phantom power
24VDC (external switch)

ANALOGUE AUDIO OUTPUT PORTS

Number of output ports
2
Connection type
Euroblock
Crosstalk
>65dB @ 1kHz

DEVICE CONTROL

Tone Control
2-band tone control
Tone Frequency Cut
BASS: 100Hz ±15dB TREBLE: 10kHz ±15dB
Talkover
Yes
Control Buttons
1x Talkover switch, 1x Auto-standby switch, 1x phantom ON/OFF,
Status Indicators
SP, CLIP, MUTE, ON/STBY

ELECTRICAL

Power supply
Universal
Secondary power supply
External 24VDC IN backup supply systems compatible
AC mains requirement
100-240VAC + External PSU 24VDC
AC mains connector
DC24V socket connector

POWER CONSUMPTION

Power Consumption (1/3 POWER, @ 4Ω)
pink noise, 36W / 62VA
Power Consumption (1/8 POWER, @ 4Ω)
pink noise, 17W / 33VA
Power Consumption (STBY)
<4W

TECHNOLOGIES

Energy save
Auto standby function
Efficiency
TBC

PROTECTIONS

AC protection
No
DC protection
No
VHF protection
No
Short-circuit protection
No
Clip limiter
No
Long term limiter
No
Thermal protection
No

REMOTE CONTROL CONNECTIONS

External MUTE
External dry contact closure

SETTINGS

Attenuators
Front panel knobs per channel
Tone control
2-band EQ (BASS/TREBLE) for Mix Output
Filters
70Hz Hig Pass Filter
Output settings
Lo-Z/70V/100V outputs
Gain
Rear panel knobs
Auto stand-by function
Front panel switch
Auto stand-by time
120 seconds
Power ON/OFF
Power mains switch (or by supplying power from external power supply)

MONITORING

Signal Present
SP LED (Green)
Cliping
CLIP LED (Red)
Standby
STBY LED (Orange)

PHYSICAL

Operating temperature
Min: -10°C ; 14°F Max: 40°C ; 104°F
Operating humidity
<85% HR
Storage temperature
Min: -10°C ; 14°F Max: 40°C ; 104°F
Storage humidity
<90% HR
Installation options
19" rack format (1 or 2 RU)
Included accessories
24VDC power supply
Optional accessories
UHRMKIT
Dimensions
Knobs excluded: 200 x 44 x 150 mm / 7.87 x 1.73 x 5.91 in. (WxHxD)
Weight
1.9 kg / 4.19 lb
Shipping dimensions
260 x 60 x 450 mm / 10.24 x 2.36 x 17.72 in. (WxHxD)
Shipping weight
2.8 kg / 6.17 lb

Compatible accessories

Ecler MPAGE1r

MPAGE1r

Paging Stations

1-zone | desktop | paging station

Ecler WPaMIX-T

WPaMIX-T

Analogue Controls & Panels

Remote Wall Micro-Mixer

Ecler WPaVOL-J

WPaVOL-J

Analogue Controls & Panels

Remote Wall Volume Control + Connector