VIDA series / Networkable Amplifiers

VIDA-48Q

Name: Ecler VIDA-48Q
Brand: Ecler
SKU: VIDA-48Q

Dante™/AES67 Digital Amplifier with DSP and Player

VIDA-48Q is a 4800W digital amplifier, with 4 amplified outputs that can be independently configured in high (100/70V) or low (8/4/2ohm) impedance. The VersaPower technology, developed by Ecler, allows an asymmetrical power distribution, and thanks to the Smart VersaPower tool it helps installers by facilitating a smart and fast configuration. In addition, the Class D amplification technology as well as the configurable 4-outputs auto standby and sleep mode functions, both configurable, further improve energy efficiency. This device offers a wide range of possibilities thanks to its 4 analogue and 4 Dante/AES67 digital inputs, audio player - with microSD slot for local audio files – as well as signal generator, plus 2 auxiliary line outputs and 4 Dante/AES67 digital outputs. All these features are managed from its intuitive web application which, among other functionalities, allows signal routing - matrix -, audio signal processing - such as equalisation or limiters -, priority management, GPIO configuration through events, as well as calendar events, playlist management and SD card content, thus facilitating the start-up of the audio-visual installation, its maintenance and customisation. Thanks to the Android/iOS/Web application available to the end user, the audio installation can be managed by them in an easy, intuitive, and customised way.

Request a quote →Chat on Zalo

Key features

014 amplified outputs VersaPower asymmetrical 4800W power management.

024 Dante™ outputs and 4 Dante/AES67 inputs.

032 auxiliary outputs.

044 analogue inputs.

05MicroSD/SDHC audio player.

06Internal matrix and signal processing.

07Web application for device configuration.

08Smart power management VersaPower.

09Control and scheduled events for automation.

10Customized User Panels.

11Remote control user application for iOS/Android/Web.

12Ultra low power consumption mode "Sleep Mode".

13Compatible with the Remote Monitoring & Control Platform EclerCLOUD.

CHANNELS

Number of output channels: 4
Output connection type: 2-pin Euroblock. Pitch: 7,62 mm Ref: DEGSON 5EDGRC-7.62
Output configuration: Lo-Z/Hi-Z, 70V/100V, 4Ω/8Ω/2Ω Output mode selection per channel Rear panel DIP SWITCH selectors
Number of input channels: 4 analogue input channels 4 DANTE/ AES67 Network Rx channels 1 embedded player, 1 embedded signal generator
Input connection type: Digital: Ethernet, managed via Dante/ AES67 Controller Analogue: IN1-4: 3-pin Euroblock, balanced, pitch 3,5 mm.
Input configuration: Digital matrix 4in x 6out (Settings by embedded web application)

AUXILIAR OUTPUTS

Number of auxiliar outputs: 2
Auxiliar output connection type: AUX1-2: 3-pin Euroblock, balanced (Euroblock pitch 3,5 mm. Settings by embedded web application)

DIGITAL OUTPUTS

Number of digital outputs: 4
Digital output connection type: Ethernet, managed via Dante/ AES67 Controller

VERSAPOWER - SYMMETRICAL All channels driven @1kHz @CF9dB @ 1%THD

Max output power @ 8Ω: 1200W
Max output power @ 4Ω: 1200W
Max output power @ 2Ω: 1200W
Max output power @ 100V: 1200W
Max output power @ 70V: 1200W

VERSAPOWER - ASYMMETRICAL Single channel driven @1kHz @CF9dB @ 1%THD

Max output power @ 8Ω: 1400W
Max output power @ 4Ω: 2600W
Max output power @ 2Ω: 1800W
Max output power @ 100V: 2860W
Max output power @ 70V: 2000W

SIGNAL

Voltage gain: 28 to 40 dBV 30,2 to 42,2 dBu
Input sensitivity: -6 to +6 dBV -3,78 to 8,2 dBu 0,5 to 2 Vrms (adjusted by means of Smart Versa Power utility)
Input impedance: >24k (balanced)
Max input level: +18 dBV +20,2 dBu (@ Gain 34 dBV)
Frequency response: 15Hz-25kHz (-3dB, 1W any load)
THD + Noise: < 0,1 % 0,015 Typ (@ 1kHz, from 0,1W to Full Power)
SNR: 95 dBA (40dB Gain, from 20Hz - 20kHz)
Crosstalk: >80dB (@ 1kHz)
CMRR: > 65 Typ (from 20Hz-20kHz)
Damping factor: >500 (@ 8Ω, from 20Hz to 1kHz)

ELECTRICAL

Power supply: Universal, regulated SMPS with PFC
AC mains requirement: 100-240 V @ 50-60Hz ((±10%)
Power factor correction: > 0,96 (Output Power > 500W)
AC mains connector: powerCON®

POWER & HEAT @230VAC - 1/4 POWER, @ 4Ω (all channels driven)

Power: 1555 W | 1606 VA
Current Draw: 7,08 Arms
Thermal Loss: 312,2 kcal/h | 1238,9 BTU/h

POWER & HEAT @230VAC - 1/8 POWER, @ 4Ω (all channels driven)

Power: 864 W | 970 VA
Current Draw: 4,24 Arms
Thermal Loss: 220,2 kcal/h | 873,7 BTU/h

POWER & HEAT @230VAC - IDLE

Power: 72 W | 125 VA
Current Draw: 0,55 Arms
Thermal Loss: 61,9kcal/h | 245,7BTU/h

POWER & HEAT @230VAC - STANDBY/SLEEP MODE

Power: 3,74 W | 31 VA
Current Draw: 0,13 Arms
Thermal Loss: 3,22kcal/h | 12,76BTU/h

POWER & HEAT @120VAC - 1/4 POWER, @ 4Ω (all channels driven)

Power: 1589 W | 1660 VA
Current Draw: 14,4 Arms
Thermal Loss: 341,4 kcal/h | 1355 BTU/h

POWER & HEAT @120VAC - 1/8 POWER, @ 4Ω (all channels driven)

Power: 866 W | 940 VA
Current Draw: 8,03 Arms
Thermal Loss: 221,9 kcal/h | 880,55 BTU/h

POWER & HEAT @120VAC - IDLE

Power: 68 W | 120 VA
Current Draw: 0,99 Arms
Thermal Loss: 57,6 kcal/h | 228,7 BTU/h

POWER & HEAT @120VAC - STANDBY/SLEEP MODE

Power: 3,25 W | 10,7 VA
Current Draw: 0,089 Arms
Thermal Loss: 2,9 kcal/h | 11,1 BTU/h

TECHNOLOGIES

Amplification technology: Class D
Energy saving: Auto standby function programmable per channel Sleep Mode function selectable
Efficiency: 77% (1/4 POWER, @ 4Ω 230VAC)
Cooling: Fan (forced air, front to back airflow. Temperature controlled continuously variable speed)
Maximum fan noise: 55,5dBA (maximum acoustical noise @1m)

DSP

Latency: 2,8 ms (Analogue IN to analogue OUT)
Digital processing: 32/64 bit
Inputs processing: Noise gate, HPF, Freq. Shifter, compressor/limiter (Settings by embedded web application)
Outputs processing: Delay, Parametric EQ, Graphic EQ independent for every amp out and aux out. Limiters independent for every amp out Smart VersaPower management (Settings by embedded web application)
Others: Preset management, Internal matrix, priority & backup signals management, local & network groups, events management incl. calendar (Settings by embedded web application)

PROTECTIONS

DC protection: Yes
HF protection: Yes
Short-circuit protection: Yes
Clip limiter: Yes
Long term limiter: Yes
Thermal protection: Yes

REMOTE CONTROL CONNECTIONS

ON / OFF: No
GPIs: x4 GPIs (0-10V) (Function and settings by embedded web application, 5-pin Euroblock connector, rear panel. Euroblock pitch 3,5 mm)
GPOs: x4 NC / NO contacts 4x 3pins Euroblock connector, rear panel Euroblock pitch 3,5 mm
External MUTE: Yes, contact (2 pins Euroblock connector, rear panel, Euroblock pitch 3,5 mm)

LOCAL CONTROL

Attenuators: Programmable Front panel knobs (defaults: Amplified OUTs attenuators)
Output mode settings: Lo-Z/Hi-Z, 70V/100V, 4Ω/8Ω/2Ω Output mode selection per channel (Rear panel DIP SWITCH selectors)
RUN/SLEEP mode: Yes, front panel push-button (operate when pressed more than 0,5 seconds)
Power ON/OFF: Yes, back panel switch (red LED indicator)

CONNECTIVITY

Ethernet: Ethernet Base-Tx 10/100/1000Mb Auto X-Over 2 Ports Ethernet Switch capability (CAT5 up to 100m. Settings by embedded web application)
DANTE Protocol: Dante/ AES67 4x Tx / 4x Rx channels (2/2 flows)
Programing and control: Embedded web application

MONITORING

Signal Present: SP LED (White) per channel (trigger @- 40 dBV)
Cliping: CLIP LED (Red) per channel (Clip, Versa power limiter, Peak power, Power supply overload)
Protect: PROT LED (Red) per channel (Current overload, Output short circuit, Under voltage, Over Voltage, DC OUT (slow blink), HF protect (fast blink)
Standby / Mute: STBY/MUTE LED (White) per channel (ON when STBY, BLINK when MUTE)
Limit: LIMIT LED (Red) per unit (Power (power supply) overload)
Thermal: THERMAL LED (Red) per unit (Temperature limiter)
Dante: DANTE/ AES67 LED (White) per unit (OFF NO WIRE, ON when MASTER, BLINK when SLAVE)
Data: DATA LED (White) per unit (ON when DATA)
On: ON LED (White) per unit (ON when RUN, SLOW BLINK when SLEEP by BUTTON, FAST BLINK when SLEEP by AUTOSTBY, VERY FAST BLINK when HW Fault)

DIGITAL ENGINE

Processor: Quad core 64bits 1,5GHz

AUDIO CONVERTERS

Sampling rate: 48 kHz
Resolution: 24 bit
Dynamic range: 114dB

REAL-TIME CLOCK

Retention time: > 5 years
Accuracy: ±1 minute / month
Battery: VARTA CR2032 3V, 230mAh

LOCAL STORAGE

Micro SD: SDXC
Capacity: Up to 2TB
File system: FAT16, FAT 32, VFAT (read/write) NTFS (read) Multi-partition up to 1
Playable audio files: mp3, ogg, WAV, FLAC, AIFF
Files analysis: 65354 playable folders 65354 playable folders within each folder 65354 playable files within each folder
Folder hierarchy: Up to 8 containing the root directory
Sorting: UNICODE, in alphabetical order Up to 100 folders / files by folder Folders/files over 100 sorted in the FAT order

PHYSICAL

Operating temperature: -10º to 50º C 14º to 122º F (performance may be reduced above 40 °C)
Operating humidity: 5 - 85% RH, non-condensing
Storage temperature: -10º to 50º C 14º to 122º F
Storage humidity: 5 - 85% RH, non-condensing
Installation options: Rack 19" installation & desktop
Included accessories: powerCON® cable, Euroblock Connectors (inputs /outputs), Desktop feet, rack 19" installation hardware
Dimensions: 482.6 x 88 x 410 mm. / 19 x 3.46 x 16.14 in. (WxHxD)
Weight: 9.9 kg / 21.8 lb
Shipping dimensions: 650 x 125 x 600 mm. / 25.59 x 4.92 x 23.62 in. (WxHxD)
Shipping weight: 12.9 kg / 28.43 lb