
SAMI series / Installation Preamps. & Mixers
SAMI-603
ANALOGUE STEREO MIXER | 6x3 | 1U rack
SAMI-603 is an installation audio mixer in standard rack format, featuring 1 MIC input + 4 MIC/LINE Stereo inputs + 1 LINE Stereo input and 3 outputs that can be configured as 1 stereo couple + 1 mono or 3 independent mono. Each output can get a dedicated mix from the available inputs and has a 3-band tone control. Talkover (priority) function is assignable to each input from IN1 to IN5 over the mix output buses. ST/MONO mix switch for the A/B outputs and MUTE port for external dry contact triggering.
Key features
016 input channels, 3 outputs 19” installation mixer
024 MIC/LINE stereo inputs
031 LINE stereo input
041 MIC input
051 stereo output or 2 x mono output (A and B outputs)
061 mono output (C output)
07Independent inputs routing for zones A, B, C
081 AUX/REC output
09Independent 3-band EQ control for outputs A/B and output C
10MUTE remote control input enabled by external dry contact closure for connecting fire detection systems and other safety devices.
11Switchable talkover function, from IN1 to IN5 over A, B, C outputs
ANALOGUE AUDIO INPUT PORTS
- Number of input ports
- 4, MIC/LINE 1, MIC 1, LINE STEREO
- Connection type
- MIC: 3-pin Euroblock LINE: RCA
- Input sensitivity
- LINE 2-5: 0dB LINE 6: 0dB/-6dB (internally selectable) MIC 1-5 BAL: -35dB
- Input sensitivity adjust
- MIC/LINE: ±15dB
- Input impedance
- LINE 2-5: 50kΩ LINE 6: 50kΩ MIC 1-5 BAL: >1kΩ
- CMRR
- MIC: >60dB @ 1 kHz
- Phantom voltage
- +18VDC
ANALOGUE AUDIO OUTPUT PORTS
- Number of output ports
- 1 main mix output 1 main mono output 1 AUX/REC output
- Connection type
- Main: 3-pin Euroblock AUX/REC: RCA
- Output type
- 1 STEREO/2 MONO main mix output 1 MONO main mix output 1 STEREO AUX/REC
- Nominal output level
- OUT: 0dB/+6dB (internally selectable) AUX/REC: 0dB/+6dB (follows MAIN OUT, when AUX OUT=POST)
- Output impedance
- OUT: 600Ω AUX/REC: 10kΩ
SIGNAL
- Frequency response
- LINE: 10Hz-50kHz -1dB MIC BAL: 10Hz-30kHz -1dB
- THD + Noise
- LINE: <0.005% MIC BAL: <0.04%
- Signal noise ratio
- LINE: >100dB MIC BAL: >85dB
DEVICE CONTROL
- Tone Control
- 2 x 3-way tone control (For section A/B and C)
- Tone Frequency Cut
- BASS: 100Hz ±15dB MID: 2kHz ±15dB TREBLE: 10kHz ±15dB
- Talkover
- TIME: 2 seconds EFFECT: -30dB
- Control Buttons
- Power ON, Talkover, LINE/MIC, L+R (input), Gain knob, Volume knob, Output destination switches, STEREO (level a)/Single (level a/b), MONO/STEREO
- Status Indicators
- Power ON LED, MUTE LED, SP/CLIP LEVEL LED
REMOTE CONTROL CONNECTIONS
- GPIs
- MUTE control port NO/NC
ELECTRICAL
- Power supply
- ±17.5VDC External PSU
- AC mains requirement
- 100-240 V @ 50-60Hz (External PSU: 17.5VDC)
- AC mains connector
- IEC inlet connector
- Power consumption
- 13.9VA / 6.3W
- Cooling
- Passive
PHYSICAL
- Operating temperature
- Min: -10°C ; 14°F Max: 40°C ; 104°F
- Operating humidity
- <85% HR
- Storage temperature
- Min: -10°C ; 14°F Max: 40°C ; 104°F
- Storage humidity
- <90% HR
- Installation options
- 19" rack format (1RU)
- Included accessories
- ±17.5VDC multi-plug PSU, EuroBlocks, Rubber Foot, Mini Jumpers
- Dimensions
- 482.5 x 44 x 153.7 mm / 19 x 1.73 x 6.05 in (WxHxD)
- Weight
- 2 kg / 4.41 lb
- Shipping dimensions
- 560 x 60 x 295 mm / 22.05 x 2.36 x 11.61 in (WxHxD)
- Shipping weight
- 2.7 kg / 5.95 lb
User manualDownload at ecler.com →
DatasheetDownload at ecler.com →
CertificatesDownload at ecler.com →
Tech files (CAD, EASE, BIM)Download at ecler.com →
Need CAD/EASE files or design support? Contact Liza Trading at info@liza.com.vn.