VIDA series / Networkable Amplifiers

VIDA-24Q

Name: Ecler VIDA-24Q
Brand: Ecler
SKU: VIDA-24Q

Dante™/ AES67 Amplifier | DSP | Player

VIDA-24Q is a 2400W digital amplifier, with 4 amplified outputs that can be independently configured in high (100/70V) or low (8/4/2ohm) impedance. The VersaPower technology, developed by Ecler, allows an asymmetrical power distribution, and thanks to the Smart VersaPower tool it helps installers by facilitating a smart and fast configuration. In addition, the Class D amplification technology as well as the configurable 4-outputs auto standby and sleep mode functions, both configurable, further improve energy efficiency. This device offers a wide range of possibilities thanks to its 4 analogue and 4 Dante/AES67 digital inputs, audio player - with microSD slot for local audio files – as well as signal generator, plus 2 auxiliary line outputs and Dante/AES67 digital outputs. All these features are managed from its intuitive web application which, among other functionalities, allows signal routing - matrix -, audio signal processing - such as equalisation or limiters -, priority management, GPIO configuration through events, as well as calendar events, playlist management and SD card content, thus facilitating the start-up of the audio-visual installation, its maintenance and customisation. Thanks to the Android/iOS/Web application available to the end user, the audio installation can be managed by them in an easy, intuitive, and customised way.

Request a quote →Chat on Zalo

Key features

014 amplified outputs VersaPower asymmetrical 2400W power management

024 Dante outputs and 4 Dante/AES67* (*supported from firmware version v1.02 or higher)

032 auxiliary outputs

044 analogue inputs

05MicroSD/SDHC audio player

06Internal matrix and signal processing

07Web application for device configuration

08Smart power management VersaPower

09Control and scheduled events for automation

10Customized User Panels

11Remote control user application for iOS/Android/Web

12Ultra low power consumption mode "Sleep Mode"

13Compatible with the Remote Monitoring & Control Platform EclerCLOUD.

CHANNELS

Number of output channels: 4
Output connection type: 2-pin Euroblock. Pitch: 7,62 mm Ref: DEGSON 5EDGRC-7.62
Output configuration: Lo-Z/Hi-Z, 70V/100V, 4Ω/8Ω/2Ω. Output mode selection per channel. Rear panel DIP SWITCH selectors
Number of input channels: 4 analogue input channels. 4 DANTE/AES67 Network Rx channels. 1 embedded player, 1 embedded signal generator
Input connection type: Digital: Ethernet, managed via Dante/AES67 Controller Analogue: IN1-4: 3-pin Euroblock, balanced, pitch 3,5 mm
Input configuration: Digital matrix 4 in x 6 out

AUXILIAR OUTPUTS

Number of auxiliar outputs: 2
Auxiliar output connection type: AUX1-2: 3-pin Euroblock, balanced

DIGITAL OUTPUTS

Number of digital outputs: 4
Digital output connection type: Ethernet, managed via Dante/AES67 Controller

VERSAPOWER - SYMMETRICAL All channels driven @1kHz @CF9dB @ 1%THD

Max output power @ 8Ω: 600W
Max output power @ 4Ω: 600W
Max output power @ 2Ω: 600W
Max output power @ 100V: 600W
Max output power @ 70V: 600W

VERSAPOWER - ASYMMETRICAL Single channel driven @1kHz @CF9dB @ 1%THD

Max output power @ 8Ω: 1400W
Max output power @ 4Ω: 2400W
Max output power @ 2Ω: 1600W
Max output power @ 100V: 2400W
Max output power @ 70V: 2000W

SIGNAL

Voltage gain: 28 to 40 dBV 30,2 to 42,2 dBu
Input sensitivity: -6 to +6 dBV -3,78 to 8,2 dBu 0,5 to 2 Vrms
Input impedance: >24kΩ
Max input level: +18 dBV +20,2 dBu
Frequency response: 15Hz-25kHz
THD + Noise: < 0,1% 0,015 Typ
SNR: 95 dBA
Crosstalk: >80 dB
CMRR: >65 Typ
Damping factor: >500

ELECTRICAL

Power supply: Universal, regulated SMPS with PFC
AC mains requirement: 100-240 V @ 50-60Hz (±10%)
Power factor correction: > 0,96
AC mains connector: IEC C14 inlet

POWER & HEAT @230VAC - 1/4 POWER, @ 4Ω (all channels driven)

Power: 848 W 888 VA
Current Draw: 3,88 Arms
Thermal Loss: 214,1 kcal/h 849,8 BTU/h

POWER & HEAT @230VAC - 1/8 POWER, @ 4Ω (all channels driven)

Power: 498 W 536 VA
Current Draw: 2,33 Arms
Thermal Loss: 170,3 kcal/h 675,8 BTU/h

POWER & HEAT @230VAC - IDLE

Power: 72 W 122 VA
Current Draw: 0,52 Arms
Thermal Loss: 61,9 kcal/h 245,7 BTU/h

POWER & HEAT @230VAC - STANDBY/SLEEP MODE

Power: 4,1 W 23,8 VA
Current Draw: 0,1 Arms
Thermal Loss: 3,5 kcal/h 14 BTU/h

POWER & HEAT @120VAC - 1/4 POWER, @ 4Ω (all channels driven)

Power: 855 W 865 VA
Current Draw: 7,37 Arms
Thermal Loss: 219,3 kcal/h 870,3 BTU/h

POWER & HEAT @120VAC - 1/8 POWER, @ 4Ω (all channels driven)

Power: 483 W 493 VA
Current Draw: 4,16 Arms
Thermal Loss: 157,4 kcal/h 624,6 BTU/h

POWER & HEAT @120VAC - IDLE

Power: 68 W 89 VA
Current Draw: 0,75 Arms
Thermal Loss: 58,5 kcal/h 232,1 BTU/h

POWER & HEAT @120VAC - STANDBY/SLEEP MODE

Power: 3,6 W 10,2 VA
Current Draw: 0,09 Arms
Thermal Loss: 3,1 kcal/h 12,3 BTU/h

TECHNOLOGIES

Amplification technology: Class D
Energy saving: Auto standby function programmable per channel Sleep Mode function selectable
Efficiency: 72%
Cooling: Fan
Maximum fan noise: 53 dB

DSP

Latency: 2,8 ms
Digital processing: 32/64 bit
Inputs processing: Noise gate, HPF, Freq. Shifter, compressor/limiter
Outputs processing: Delay, Parametric EQ, Graphic EQ independent for every amp out and aux out Limiters independent for every amp out Smart VersaPower management
Others: Preset management, Internal matrix, priority & backup signals managemnet, local & network groups, events management incl. calendar

PROTECTIONS

DC protection: Yes
HF protection: Yes
Short-circuit protection: Yes
Clip limiter: Yes
Long term limiter: Yes
Thermal protection: Yes

REMOTE CONTROL CONNECTIONS

ON / OFF: No
GPIs: x4 GPIs (0-10V)
GPOs: x4 NC / NO contacts
External MUTE: Yes, contact

LOCAL CONTROL

Attenuators: Programmable Front panel knobs
Output mode settings: Lo-Z/Hi-Z, 70V/100V, 4Ω/8Ω/2Ω Output mode selection per channel
RUN/SLEEP mode: Yes, front panel push-button
Power ON/OFF: Yes, back panel switch

CONNECTIVITY

Ethernet: Ethernet Base-Tx 10/100/1000Mb Auto X-Over
DANTE Protocol: Dante/AES67 4x Tx / 4x Rx channels (2/2 flows)
Programing and control: Embedded web application

MONITORING

Signal Present: SP LED (White) per channel
Cliping: CLIP LED (Red) per channel
Protect: PROT LED (Red) per channel
Standby / Mute: STBY/MUTE LED (White) per channel
Limit: LIMIT LED (Red) per unit
Thermal: THERMAL LED (Red) per unit
Dante: DANTE/AES67 LED (White) per unit
Data: DATA LED (White) per unit
On: ON LED (White) per unit

DIGITAL ENGINE

Processor: Quad core 64bits 1,5GHz

AUDIO CONVERTERS

Sampling rate: 48 kHz
Resolution: 24 bit
Dynamic range: 114 dB

REAL-TIME CLOCK

Retention time: > 5 years
Accuracy: ±1 minute / month
Battery: VARTA CR2032 3V, 230mAh

LOCAL STORAGE

Micro SD: SDXC
Capacity: Up to 2TB
File system: FAT16, FAT 32, VFAT (read/wirte) NTFS (read) Multi-partition up to 1
Playable audio files: mp3, ogg, WAV, FLAC, AIFF
Files analysis: 65354 playable folders 65354 playable folders within each folder 65354 playable files within each folder
Folder hierarchy: Up to 8 containing the root directory
Sorting: UNICODE, in alphabetical order Up to 100 folders / files by folder Folders/files over 100 sorted in the FAT order

PHYSICAL

Operating temperature: Min: -10⁰C ; 14⁰F Max: 50⁰C ; 122⁰F
Operating humidity: 5 - 85% RH, non-condensing
Storage temperature: Min: -10⁰C ; 14⁰F Max: 50⁰C ; 122⁰F
Storage humidity: 5 - 85% RH, non-condensing
Installation options: Rack 19" installation & desktop
Included accessories: Mains cords, Euroblock Connectors (inputs /outputs), Desktop feet, rack 19" installation hardware
Dimensions: 482.6 x 88 x 410 mm / 19 x 3.46 x 16.14 in. (WxHxD)
Weight: 9.3 kg / 20.5 lb
Shipping dimensions: 650 x 125 x 600 mm / 25.59 x 4.92 x 23.62 in. (WxHxD)
Shipping weight: 12.3 kg / 27.1 lb