Paging Stations

eMPAGE

Name: Ecler eMPAGE
Brand: Ecler
SKU: eMPAGE

16-zone | 20-key | e-ink display | RJ45

eMPAGE is a digital paging station (MPAGE16's evolution), compatible with HUB, MIMO88, MIMO88SG and MIMO1212SG digital matrixes. Includes: a gooseneck cardioid microphone (removable); 16 zone-selection keys; ALL, CLEAR and PAGE keys; 2 programmable keys, F1 & F2, for zone-group selection. Text labelling for destination areas by means of programmable electronic ink display.

Request a quote →Chat on Zalo

Key features

0120 mechanical keys with integrated LED status indicator (paging zone selection management)

021 mechanical key with adjacent LED indicator (message activation, PAGE key)

03Electronic ink display (shows paging zone names)

04Gooseneck microphone, with standard XLR connector

05Management of up to 16 paging zones

06RJ45 connector for single CAT5 or higher cabling (point-to-point), including power, audio output signal (picked up by the microphone) and digital control bus between the HUB unit and the eMPAGE station

07Connector for backup power supply (optional)

08Two eMPAGE units, with different or equal priority levels, can work simultaneously on the same HUB zoner

09Programming of paging station(s) functionality from the web application embedded in the HUB: enabled paging zones, chime melodies, priorities, programmable keys, etc.

SYSTEM

Number of output channels: 1 (picked up by the microphone)
Number of paging zones: 16

MIC INPUTS

Microphone type: Removable gooseneck condenser microphone (eMCN1)
Polar pattern: Unidirectional
Frequency response: 50Hz – 18KHz (-10dB)
Phantom power: 48VDC, always ON
Input connection type: XLR female conection type

SCREEN/DISPLAY

Resolution: 296x128 Pixels
Display: Active Matrix Electrophoretic Display
Touch-panel: No

MONITORING AND CONTROL

LED indicators: Green LED on All and Clear keys, Bicolor LED on other keys
Buttons: Paging zone selection keys, PAGE key, F1, F2, All & Clear keys

CONNECTIVITY

Ethernet: 1 RJ45 connector, cable: Cat-5 or better. Supports PoE
Programing and control: RS485 and CAN, internally selectable by JUMPER

ELECTRICAL

Power supply: Optional, 24VDC (min. 80mA) Recommended external power supply: Ecler WP24-PSU
PoE: Yes
AC mains requirement: From RJ45 remote input: 12VDC From External Input: 24VDC (With WP24-PSU backup power supply)
Max power consumption: From RJ45 remote input: 180mA From External Input: 180mA

PHYSICAL

Type: Paging station
Installation options: Desktop
Operating temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
Operating humidity: <85% HR
Storage temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
Storage humidity: <90% HR
Included accessories: Windscreen for Microphone, jumper for internal connection and RJ45 to Euroblock adapter
Dimensions: 150 x 50 x 180 mm / 5.91 x 1.97 x 7.09 in. (WxHxD) (microphone excluded)
Weight: 0.9 kg / 1.98 lb