MIMO series / Digital Matrixes

MIMO88

Name: Ecler MIMO88
Brand: Ecler
SKU: MIMO88

8x8 | digital matrix | DSP | expandable

MIMO88 is an 8 in / 8 out digital audio matrix, fully programmable and linkable to a second unit to become a 16x16 matrix, with real routing from any input to any output.

Request a quote →Chat on Zalo

Key features

01Expandable to 16 inputs / 16 outputs to become a real 16 x 16 matrix

02Fully programmable and controllable via EclerNet software

03UCP (User Control Panels) remote control system, compatible with WPNETTOUCH and third-party devices, such as computers, tablets, smartphones, etc.

04TP-NET protocol compatible, for third-party control systems integration

05DSP processing: signal generator, delays, full parametric EQ filters at inputs and outputs, inputs noise gate, level, mute, phase, vu-meters, outputs compressor / limiter,ducking (priority & overriding), virtual and physical paging stations management,automatic mixer function, presets save & recovery, scheduled events triggering, etc.

06FREQUENCY SHIFTER function to avoid acoustic feedback (Larssen Effect), available for each INPUT channel

07WPNET4KV and WPNET8K compatible control panels (using specific retro-compatible Firmware).

DIGITAL ENGINE

Processor: 2 x 32/64bit

AUDIO CONVERTERS

Sampling rate: 48kHz
Resolution: 24bit AKM
Latency: <2.9ms (+1ms for 16x16)
Frequency response: 5Hz to 24kHz (-3dB)
Dynamic range: AD:110dB, DA: 115dB

ANALOGUE AUDIO INPUT PORTS

Number of input ports: 8+8, Mic/Line
Connection type: Terminal block (symmetrical)
Input sensitivity: -50dBV to +10dBV in 0.5dB step
Input impedance: Balanced, >4kΩ
Max input level: +27dBV = +30dBu
THD + Noise: THD+Noise @ 1kHz, 0dBV input (line) <0.004% THD+Noise @ 1kHz, -40dBV input (mic.) <0.008%
CMRR: 65dB typ.
Phantom power: +42VDC, 5mA max. software switched

ANALOGUE AUDIO OUTPUT PORTS

Number of output ports: 8+8, Line
Connection type: Terminal block (symmetrical)
Max output level: +18dBV = +21dBu
Crosstalk: Better than 90dB (100dB typ.)

ANALOGUE MONITOR PORTS

Number of monitor output ports: 2
Connection type: Terminal block (symmetrical)
Headphones: Jack 1/4 (>200mW/200Ω)

CONNECTIVITY

Ethernet: 1 RJ-45, Ethernet Base-Tx 10/100Mb Auto X-Over CAT5 up to 100m
Serial port: RS-232
Programing and control: EclerNet manager (software), TPNET (UDP), UCP control panels

REMOTE CONTROL CONNECTIONS

Digital remote controls: Expansion LINK BUS (16x16 ch.): Proprietary over CAT5, Xover cable up to 100m. Remote Bus: 2, over twisted pairs; up to 1km (see specific specs.)
GPIs: 8, from 0 to 10VDC or TTL level
GPOs: 8, 3 poles isolated relay; 1A, 48VDC max

REAL-TIME CLOCK

Retention time: 1 month aprox. (ambient temperature dependant)
Accuracy: ±1 minute / year

ELECTRICAL

Secondary power supply: +12VDC, 1.2A. max. (short circuit protected)
AC mains requirement: 90-264VAC @ 47-63Hz
AC mains connector: IEC mains socket connector
Power consumption: 45VA

PHYSICAL

Operating temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
Operating humidity: <85% HR
Storage temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
Storage humidity: <90% HR
Installation options: 19" rack format (1RU)
Optional accessories: WPa series control panels, WPNETTOUCH digital panel, eMPAGE
Dimensions: 482.6 x 44 x 266.5 mm / 19 x 1.73 x 10.5 in. (WxHxD)
Weight: 3.5 kg / 7.72 lb
Shipping dimensions: 590 x 70 x 380 mm / 23.23 x 2.76 x 14.96 in. (WxHxD)
Shipping weight: 4.8 kg / 10.58 lb